使用时需要注意什么地方吧！
What should I pay attention to when using it!
1、运输液体
1. Transporting liquids
因为蠕动泵的运行原理的原因，不同黏稠度的液体也会使其流量发生变化，所以在选择蠕动泵的时候，一定要注意咨询自己生产传输的流体是什么，这样创锐才比较好推荐相应的驱动器，泵头和软管。
Because of the operation principle of Peristaltic pump, the flow of liquid with different viscosity will also change. So when choosing Peristaltic pump, you must pay attention to consult what the fluid you produce and transmit, so that Chuangrui can better recommend the corresponding driver, pump head and hose.
2、注意维护
2. Pay attention to maintenance
虽说蠕动泵的耗材一般只有软管，驱动器和泵头的使用时间都比较长，但也要看工作环境的恶劣程度，如果是比较潮湿或者灰尘比较多的环境，注意给蠕动泵做好隔膜防护，以防水汽或灰尘对元器件有所影响。
Although the consumables of Peristaltic pump are generally only hoses, and the use time of the driver and pump head is relatively long, it also depends on the severity of the working environment. If it is relatively humid or dusty, pay attention to the diaphragm protection of Peristaltic pump to prevent the influence of steam or dust on components.
3、软管寿命
3. Service life of hose
不论是选择国产软管还是进口软管，都是用有使用寿命的，要注意软管的使用时长，及时更换，如果因为软管的磨碎导致液体泄漏，甚至会引起滚轮腐蚀、抱死、严重的烧毁电机。
Whether choosing domestic or imported hoses, they all have a long service life. It is important to pay attention to the service life of the hoses and replace them in a timely manner. If liquid leakage is caused by the grinding of the hoses, it may even cause roller corrosion, locking, and serious motor burning.
4、注意吸程和扬程
4. Pay attention to suction and lift
吸程是指液面水平位置到泵头的垂直高度，而扬程就是泵头到液体出水口的垂直高度。过大的吸程或扬程都会引起流量的急速衰减，影响正常使用，所以在生产使用中尽量保证吸程和扬程在一个合理的区间。
The suction head refers to the vertical height from the horizontal position of the liquid level to the pump head, while the head is the vertical height from the pump head to the liquid outlet. Excessive suction or head can cause rapid attenuation of flow rate, affecting normal use. Therefore, in production and use, it is best to ensure that the suction and head are within a reasonable range.
5、注意咨询
5. Pay attention to consultation
虽然我们蠕动泵的参数撰写的已经足够详细，但还州苗木  保定电动门 保定空压机 化粪池模具 微型蠕动泵 保定强夯 收费岛模是建议大家能咨询后再选择产品。因为工作环境和传输流体的不同，您所心仪的蠕动泵可能不是较好选择，例如之前有人想选FJ系列，但工作环境其实只有流体传输，不需要分配，选择M系列即可，即节省了学习成本，也节省了资金。
Although we have written the parameters of Peristaltic pump in sufficient detail, we still suggest that you can consult before selecting the product. Because the working environment and fluid transmission are different, your favorite Peristaltic pump may not be a good choice. For example, someone wanted to choose FJ series before, but the working environment is only fluid transmission, and there is no need to allocate. Choosing M series can save both learning costs and funds.